You asked for it so here it is the 900mm vinyl die cut sticker. 

PUT A BUCK ON IT!

The perfect accessory to beautify the truck,tractor, toolbox, bumper, the back window, the throne.. 

Anywhere is appropriate for Shelford the buck as long as he can fit.

Features:

• Dimensions: 900mm x 233mm

• Colours: Matte Black or Gloss White

• UV protected

• Weatherproof

• Easy to apply

• Leave no sticky residue left behind when removed

How to apply the Sticker:

Step 1: Wipe down the surface with an alcohol or cleaning agent so that there is no dirt or dust left on the surface and wait for the surface to dry.

Step 2: You will be applying this sticker to the outside of the surface so position it over the area you wish to put it (a good thing to do is to mark the edges with a white board marker at the ends of the film so when you come to apply sticker it remains straight).

Step 3: Peel back the underside of the sticker film to the right to the start of the vinyl exposing approximately 1 inch of the sticky side. Once you are happy the sticker it is in the right location start at the vinyl edge and rub firmly your finger over the vinyl area working your way in to the right making sure all air bubbles are pushed out. Continue to pull the film to the right rubbing the vinyl as you go. There is no rush so take it slow!

Step 4: Once the Vinyl sticker has been applied onto the surface in full and the inside film completely removed. You can now remove the rear film. Make sure you do this slowly and make sure the vinyl is securely stuck onto the surface. You may have to give it another we rub as you are pulling it off.

Step 5: Tag us in social media with your sweet sticker setup #bushbuckoutdoors